Wharfedale Titan-12 WH Passive White
Opis:
Dvosistemska pasivna zvučna kutija sa 12" zvučnikom.
1" izlaz/1.75" diafragma titaniumskog kompresionog drajvera.
Pri frekvenciji od 55 Hz do 20000 Hz, impedance 8 Ohma, konstantne snage 350W.
Trapezoidnog oblika za vertikalnu ili horizontalnu postavku, dimnezija 556x384x312 mm, težine 12 kg.
Wharfedale Pro TitanT 12 series with 12"/2" voice coil LF components and 44mm Titanium Diaphragm true Compression Driver and the integrated 90°x60° Waveguide horn to achieve a clean volume dispersion with wide, even reflection of the high frequency. The cabinets of the TitanT series are made of extremely resonance proof High Density Polyethylene structural foam finished. This material gives a lightweight and very robust enclosure.
The system can be arrayed for additional coverage and SPL requirements. The elliptical waveguide HF section provides consistent coverage over its specified range for low feedback in open mic applications and improved array smoothness, whether applied to a reverberant or "dry" club type acoustic environment The TitanT 12 integrates successfully with the room for superior sound quality with a minimum of equalization and tuning.
For permanent sound installations, architectural compatibility of primary importance, mounting points become critical. TitanT 12 series threaded points (Three on top, four on bottom, and three on each side for horizontal rigging) set a standard with Omnimount footprint on bottom.
Specifications
-
Untitled Document SPECIFICATIONS
MODEL
TITAN 12 PASSIVE
GENERAL INFO System type 12" 2-way passive Frequency response +/- 3db 55-20kHz Sensitivity (db 1w@1m) 98dB System impedance 8 ohms Maximum SPL Peak dB 128dB POWER HANDLING (Watts) Continuous RMS 250 Program 500 Peak 1000 LF DRIVER Lf driver size mm / inches 1x12" Lf voice coil size 64.26mm/2.5" HF SECTION Hf voice coil size 44mm/1.75" Hf type Compression Driver Hf diaphragm material Titanium Horn dispersion (H x V) 90 x 60 Hf exit size mm / inches 25mm/1" Hf horn shape EWGT - Elliptical Waveguide Hf peak indicator Peak LED ring in horn throat CROSSOVER SECTION Type: 2-way Crossover Frequency / Filter 2.4 kHz / Linkwitz-Riley Hf driver protection DTFT - 175 Dynamic Thermal Filament Hf EQ (Boost / Flat) 3dB boost (long-throw) / Flat (near-field) PHYSICAL FEATURES Finish Black or White Handle quantity 2 carry handles (one on each side) Suspension points (10) M8 points for safe flown applications, (4) M8 inserts on bottom in OmniMountR 60.0-type footprint Stand adapter - BOTTOM Speaker pole-mount receptacle with lock screw, Optional wall-mount bracket Stand adapter - TOP Optional dual-unit array speaker stand hardware Enclosure type Molded Polypropylene Enclosure shape Trapezoidal for vertical array and horizontal stage monitor applications IN / OUT PANEL (speaker Level) Input connector 2 x 1/4" jacks and2 x SpeakonT DIMENSIONS & WEIGHT Height ( mm / ins ) 556mm/21.88" Width Front / Rear / mm / ins 384mm/15.1" / 180mm/7.1" Depth ( mm / ins ) 312mm/12.3" Net weight ( kg / lbs ) 12kg/26.4lbs Gross weight ( kg / lbs ) 14kg/30.8lbs Proprietary 90 x 60 Elliptical Wave Guide Horn design Custom Heavy duty moisture-proof 12" LF driver High-end Titanium HF Compression Driver Tough Polypropylene molded cabinet with rubber padded handles Multiple M8 rigging points and integral tripod stand adapter Rugged protective grille and top-stacking receptacles Trapezoid shape for arrays as well as stage monitor applications DTFT - High-Frequency Driver Overload protection Sophisticated Linkwitz-Riley 24dB/octave crossover design High-Frequency EQ switch (boost/flat) for long-throw applications Both 1/4" and NL4 connectors provided Available in grey & white TITAN 12 PASSIVE BROCHURE TITAN 15 PASSIVE MANUAL TITAN 8 PASSIVE BROCHURE TITAN SERIES BROCHURE TITAN SERIES MANUAL TITAN 15 PASSIVE BROCHURE TITAN 12 PASSIVE MANUAL