Wharfedale Q-230 Ekvilajzer

Wharfedale Q-230 Ekvilajzer

Opis:

Untitled Document

The Q-230 is a dual channel 30 band 1/3 octave graphic equalizer using constant Q filters to maintain even bandwidth irrespective of gain ensuring transparent adjustments even with extreme gain settings.

A fader range switchable from 6dB to 12dB helps you to get the best possible sound from your rig in the situation you are faced with. A sweepable 40Hz to 100Hz 12dB/octave HPF allows accurate removal of unwanted low end rumble that can in turn increase overall system headroom. The Q-230 is housed in a 2U 19” rackmount chassis and and has inputs and outputs on XLR and 1/4” TRS balanced / unbalanced connectors. Ground lift switches can eliminate any earth loop or hum issues. Power is supplied via an IEC connector.

Specifications

  •  

    Untitled Document

    MODELQ-230
    Power Supply  
    Operating Voltage 100VAC 50/60Hz,120VAC60Hz, 230VAC 50/60Hz
    Power consumption 12W
    Mains Connection IEC receptacle
    INPUT/ OUTPUT  
    Connectors 1/4" TRS, female XLR(pin 2 hot)
    Input Impedance Balanced 20k ohm,unbalanced 10k ohm
    Max Input Level >+21dBu balanced or unbalanced
    CMRR >40dB, typically >55dB at 1kHz
    Type Impedance-balanced/unbalanced, RF filtered
    Output Impedance Balanced 100 ohm,unbalanced 50 ohm
    Max Output Level >+21dBu balanced/ unbalanced into 2k ohm or greater
    SYSTEM PERFORMANCE  
    Bandwidth 20Hz to 20kHz, +0.5/-1dB
    Frequency Response <10Hz to >50kHz, +0.5/-3dB
    Dynamic Range 108 dB
    Signal-to-Noise 90 dB
    THD + Noise <0.004%
    Interchannel Crosstalk <-80dB, 20Hz to 20kHz
    FUNCTION SWITCHES  
    EQ Bypass Bypasses the graphic equalizer section in the signal path
    Low Cut Sweepable with rotary control from 20Hz – 100Hz
    Range Selects either +/- 6dB or +/-12dB slider boost/cut range
    Soft limit Activates soft limiting on the outputs to prevent excessive levels reaching the amplifier
    DIMENSIONS/WEIGHT  
    Dimension 482.6 x 168 x 88 mm
    Weight 3.93 kg

    </html