Untitled Document
The Q-230 is a dual channel 30 band 1/3 octave graphic equalizer using constant Q filters to maintain even bandwidth irrespective of gain ensuring transparent adjustments even with extreme gain settings.
A fader range switchable from 6dB to 12dB helps you to get the best possible sound from your rig in the situation you are faced with. A sweepable 40Hz to 100Hz 12dB/octave HPF allows accurate removal of unwanted low end rumble that can in turn increase overall system headroom. The Q-230 is housed in a 2U 19” rackmount chassis and and has inputs and outputs on XLR and 1/4” TRS balanced / unbalanced connectors. Ground lift switches can eliminate any earth loop or hum issues. Power is supplied via an IEC connector.
Untitled Document
MODEL | Q-230 |
---|---|
Power Supply | |
Operating Voltage | 100VAC 50/60Hz,120VAC60Hz, 230VAC 50/60Hz |
Power consumption | 12W |
Mains Connection | IEC receptacle |
INPUT/ OUTPUT | |
Connectors | 1/4" TRS, female XLR(pin 2 hot) |
Input Impedance | Balanced 20k ohm,unbalanced 10k ohm |
Max Input Level | >+21dBu balanced or unbalanced |
CMRR | >40dB, typically >55dB at 1kHz |
Type | Impedance-balanced/unbalanced, RF filtered |
Output Impedance | Balanced 100 ohm,unbalanced 50 ohm |
Max Output Level | >+21dBu balanced/ unbalanced into 2k ohm or greater |
SYSTEM PERFORMANCE | |
Bandwidth | 20Hz to 20kHz, +0.5/-1dB |
Frequency Response | <10Hz to >50kHz, +0.5/-3dB |
Dynamic Range | 108 dB |
Signal-to-Noise | 90 dB |
THD + Noise | <0.004% |
Interchannel Crosstalk | <-80dB, 20Hz to 20kHz |
FUNCTION SWITCHES | |
EQ Bypass | Bypasses the graphic equalizer section in the signal path |
Low Cut | Sweepable with rotary control from 20Hz – 100Hz |
Range | Selects either +/- 6dB or +/-12dB slider boost/cut range |
Soft limit | Activates soft limiting on the outputs to prevent excessive levels reaching the amplifier |
DIMENSIONS/WEIGHT | |
Dimension | 482.6 x 168 x 88 mm |
Weight | 3.93 kg |
</html