Untitled Document
TitanT 12
Wharfedale Pro TitanT 12 series with 12"/2" voice coil LF components and 44mm Titanium Diaphragm true Compression Driver and the integrated 90°x60° Waveguide horn to achieve a clean volume dispersion with wide, even reflection of the high frequency. The cabinets of the TitanT series are made of extremely resonance proof High Density Polyethylene structural foam finished. This material gives a lightweight and very robust enclosure.
The system can be arrayed for additional coverage and SPL requirements. The elliptical waveguide HF section provides consistent coverage over its specified range for low feedback in open mic applications and improved array smoothness, whether applied to a reverberant or "dry" club type acoustic environment The TitanT 12 integrates successfully with the room for superior sound quality with a minimum of equalization and tuning.
For permanent sound installations, architectural compatibility of primary importance, mounting points become critical. TitanT 12 series threaded points (Three on top, four on bottom, and three on each side for horizontal rigging) set a standard with Omnimount footprint on bottom.
Untitled Document
SPECIFICATIONS |
|
MODEL |
TITAN 12 PASSIVE |
GENERAL INFO | |
System type | 12" 2-way passive |
Frequency response +/- 3db | 55-20kHz |
Sensitivity (db 1w@1m) | 98dB |
System impedance | 8 ohms |
Maximum SPL Peak dB | 128dB |
POWER HANDLING (Watts) | |
Continuous RMS | 250 |
Program | 500 |
Peak | 1000 |
LF DRIVER | |
Lf driver size mm / inches | 1x12" |
Lf voice coil size | 64.26mm/2.5" |
HF SECTION | |
Hf voice coil size | 44mm/1.75" |
Hf type | Compression Driver |
Hf diaphragm material | Titanium |
Horn dispersion (H x V) | 90 x 60 |
Hf exit size mm / inches | 25mm/1" |
Hf horn shape | EWGT - Elliptical Waveguide |
Hf peak indicator | Peak LED ring in horn throat |
CROSSOVER SECTION | Type: 2-way |
Crossover Frequency / Filter | 2.4 kHz / Linkwitz-Riley |
Hf driver protection | DTFT - 175 Dynamic Thermal Filament |
Hf EQ (Boost / Flat) | 3dB boost (long-throw) / Flat (near-field) |
PHYSICAL FEATURES | |
Finish | Black or White |
Handle quantity | 2 carry handles (one on each side) |
Suspension points | (10) M8 points for safe flown applications, (4) M8 inserts on bottom in OmniMountR 60.0-type footprint |
Stand adapter - BOTTOM | Speaker pole-mount receptacle with lock screw, Optional wall-mount bracket |
Stand adapter - TOP | Optional dual-unit array speaker stand hardware |
Enclosure type | Molded Polypropylene |
Enclosure shape | Trapezoidal for vertical array and horizontal stage monitor applications |
IN / OUT PANEL (speaker Level) | |
Input connector | 2 x 1/4" jacks and2 x SpeakonT |
DIMENSIONS & WEIGHT | |
Height ( mm / ins ) | 556mm/21.88" |
Width Front / Rear / mm / ins | 384mm/15.1" / 180mm/7.1" |
Depth ( mm / ins ) | 312mm/12.3" |
Net weight ( kg / lbs ) | 12kg/26.4lbs |
Gross weight ( kg / lbs ) | 14kg/30.8lbs |
Proprietary 90 x 60 Elliptical Wave Guide Horn design | |
Custom Heavy duty moisture-proof 12" LF driver | |
High-end Titanium HF Compression Driver | |
Tough Polypropylene molded cabinet with rubber padded handles | |
Multiple M8 rigging points and integral tripod stand adapter | |
Rugged protective grille and top-stacking receptacles | |
Trapezoid shape for arrays as well as stage monitor applications | |
DTFT - High-Frequency Driver Overload protection | |
Sophisticated Linkwitz-Riley 24dB/octave crossover design | |
High-Frequency EQ switch (boost/flat) for long-throw applications | |
Both 1/4" and NL4 connectors provided | |
Available in grey & white | |
TITAN 12 PASSIVE BROCHURE | |
TITAN 15 PASSIVE MANUAL | |
TITAN 8 PASSIVE BROCHURE | |
TITAN SERIES BROCHURE | |
TITAN SERIES MANUAL | |
TITAN 15 PASSIVE BROCHURE | |
TITAN 12 PASSIVE MANUAL | |
</html